DIVIMATH HDZero Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Acessórios DIVIMATH HDZero. DIVIMATH HDZero 17 páginas.
Também para DIVIMATH HDZero: Manual de início rápido (8 páginas)

Imprimir página

Normal Goggle Firmware Update Process

1. Disconnect all cables from the goggle. Keep the power cable only;

2. Copy HDZGOGGLE_xx.yy.zzz.bin to root directory of a SD card that is formatted as FAT32, and

make sure there is no previous firmware in the root directory;

3. Power on the goggle;

4. Go to Main menu | About | Flash Goggle, the display will show the status;

5. Wait for the completion (about 3 minutes);

6. Power the goggle off and then on again

Goggle Emergency Firmware Update Process

You need to download PhoenixCard.zip from the

Windows machine, for example, C:\PhoenixCard. This is a one-time process. There is no Mac or Linux

version for now.

You need to download GoggleEmergency_Revddmmyyyy.zip zip from the

extract to your local drive, i.e. C:\Tmp.

1. Launch C:\PhoenixCard\PhoenixCard.exe;

2. Follow the steps on FIG.5 to make a bootable SD card;

3. Eject the SD card from Windows, and insert the SD card into the SD card slot of the goggle;

Unplug all of the cables, i.e., HDMI in/out, Line in/out, AV in. Keep the power cable only. Power

on the goggle, you will hear a long beep immediately. Wait for 3 minutes and you will hear

another long beep;

5. Power off the goggle, and pull out the SD card from the goggle. (Do not power on goggle now);

6. Follow the FIG.6 to restore the SD Card from BOOT mode, and format it as FAT32 on Windows;