3DUpFitters Ender 3 S1 Enclosure Kit Manual de instalação - Página 3

Procurar online ou descarregar pdf Manual de instalação para Impressoras 3D 3DUpFitters Ender 3 S1 Enclosure Kit. 3DUpFitters Ender 3 S1 Enclosure Kit 17 páginas.

Imprimir página

You Really Do Want to Read the Directions

Hey, we get it. You just got your new enclosure kit and want to start using it as fast as possible.

How hard can assembling a few plastic panels possibly be? It's not really that hard, assuming

you're following the directions, but try to use brute force and you'll end up working your way

through your vocabulary of swear words. While the acrylic pieces in the kit are strong, they are

still plastic and will break if bent far enough. The ghosts of the broken panels that have gone

before you have become much stronger than you could ever imagine, and are whispering into

your ear, "just be a little careful".

Before you Start

Is This Manual for Your Kit?

This installation manual covers the enclosure design for the Creality Ender 3 S1 ONLY.

The Ender 3 V1, V2, and Max all require diﬀerent enclosures! If you have a diﬀerent version of

the enclosure please read previous versions of the manual available on the website.

Is your Printer Customized?

If your printer is stock then no customization is needed. If you have customized the printer,

you should examine any modiﬁcations to make sure they don't block the panels. If part of one

of the panels is blocked, you can use a laser or drill to customize one or more panels. This

should be done before removing the plastic or paper covers on the acrylic panels.

Cutting acrylic requires great care as the plastic is prone to crack if mishandled.

Preparing the Printer 

Remove any ﬁlament from the hot end (will require heating the hot end) and remove the

ﬁlament spool from the spool holder.

Turn the printer oﬀ and unplug the power cable from the printer's power supply.