DivioTec NBF232P Manual rápido

Procurar online ou descarregar pdf Manual rápido para Câmara de segurança DivioTec NBF232P. DivioTec NBF232P 2 páginas. Full hd extreme wdr box network camera

Imprimir página

This guide is for quick installing and connecting the Full HD Extreme WDR box network camera. For more details,

please refer to the User's Manual of the camera in the supplied CD.

Camera's Connectors

DC 12V / PoE

No.

Connector

Audio I/O

Two-way audio transmission

Power LED

For power connection indication (green light)

Press the button with a proper tool for at least 20 seconds to restore the

Default Button

system.

Auto Iris

For auto iris lens connection

PoE Network

For network and PoE connections

Network LEDs

For network connection and activity indication

Alarm Out +

Alarm Out –

Alarm I/O

DC 12V

Alarm In +

Alarm In –

AC 24V

BNC

For analogue video output

Insert the microSD card into the card slot to store videos and snapshots. Do

microSD Card Slot

not remove the microSD card when the camera is powered on.

DC 12V

Power (DC12V / AC 24V)

DC 12V Reserved

(AC 24V Model)

−

DC 12V GND

NETWORK

NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to

support long term continuous data read/write. Please contact the manufacturer of the microSD card for

information regarding the reliability and the life expectancy.

Camera Cabling

Please follow the instructions below for cable connections.

PoE

Power Connection

Please use a DC 12V / AC 24V power adaptor and plug it to the power connector of camera and the power outlet.

Alternatively, users can use an Ethernet cable and connect it to the RJ-45 connector of the camera and a Power

Sourcing Equipment (PSE) switch.

NOTE: If PoE is used, make sure PSE is in used in the network.

Ethernet Cable Connection

Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to

the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the

PC.

Full HD Extreme WDR Box Network Camera NBF232P Quick Guide

DC 12V/ AC 24V/ PoE

Definition

GND

D −

D +

DC VIDEO

AC 24V 1

1 2 3 4 I/O

AC 24V GND

AC 24V 2

LINE

LINE IN

OUT

MIC IN

AUTO

IRIS

NOTE: Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, please

check the LAN connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

Before Login to the Camera

A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the

camera, please ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and

plug-ins or setting Internet's security level to default. For further details, please refer to the User's Manual in the

supplied CD.

ActiveX Controls and Plug-ins Settings

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>, and click on <Custom level> to

change ActiveX settings.

Step 4: Set "ActiveX controls and plug-ins" items to

<Prompt> or <Enable>.

Camera Login

The default IP address of the camera is: 192.168.0.250. Therefore, to access the camera for the first time, please set

the IP address of the PC as: 192.168.0.XXX; for example:

IP Address: 192.168.0.100

Subnet Mask: 255.255.255.0

 Key in the camera's IP address in the URL bar of the web browser window and hit on "Enter".

 Enter the default username (Admin) and password (1234) in the prompt request dialogue. Note that username is

case sensitive.

Install the ActiveX Control

 After connecting to the camera, the request for installing the ActiveX control will appear just below the URL bar.

 Right click on the information bar, and then click on <Install ActiveX Control...> to permit ActiveX control

installation.

 In the pop-up security warning window, click on <Install> to start downloading DC Viewer software on the PC.

 Click on <Finish> after DC Viewer installation is completed.

Internet Security Level

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>.

Step 4: Down the page, click <Default Level> and click

on <OK> to confirm the setting. Close the

browser window, and open a new one later for

accessing the IP camera.