esera automation 11355 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Controlador esera automation 11355. esera automation 11355 5 páginas. Termination for 1-wire bus system
Imprimir página
3
Technical Data Sensor
1-Wire Modul:
Terminating resistor:
Operating voltage:
Power consumption:
Indicator:
Dimensions:
4
Ambient conditions
Protection system:
Protection class:
Temperature,Operation: -40°C to +125°C
5
Pin assignment
The 1-Wire Term 1 module requires a 5V power supply for operation.
It is connected with three cables, ground, 1-Wire Data and 5V.
6
Conformity
EN 50090-2-2,
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, interference immunity
EN 61000-6-3, interference radiation
RoHS
7
Integration in 1-Wire Network
The 1-Wire Term 1 module is mounted at the end of a 1-Wire network cable.
If the 1-Wire network is star-shaped, i.e. with several 1-Wire cable sections, a 1-Wire Term 1 module should be
connected to each end.
No more than three 1-Wire Term 1 modules should be used in a 1-Wire network.
7.1
Linear Topology
The design corresponds to the linear topology with the difference that the slaves are connected to the main line
via lines with a length of more than 3 m (branch, stub).
Power
Bus
Master
Supply
7.2
Star or Tree Topology
Here, the network is divided into several large strings at or near the 1-wire bus coupler / 1-wire controller / 1-wire
hub (bus master). Sensors and actuators (e.g. switching modules) are connected at the end or along the
respective string.
Bus
Power
Supply
Master
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
none
3,3 kOhm passiv, plus active function
5 VDC +/-10%
max. 5mA
Power und Data
44 x 44 x 25mm (LxWxH)
IP68
III
Sensors and Actuator
11355 V2.0 R1.0 Manual
Sensors and Actuator
Page 2 of 5