3DUpFitters FT-5 Enclosure Kit Manual de instalação - Página 10

Procurar online ou descarregar pdf Manual de instalação para Impressoras 3D 3DUpFitters FT-5 Enclosure Kit. 3DUpFitters FT-5 Enclosure Kit 16 páginas.

Imprimir página

Cut two 1" pieces of rubber trim, and then insert them in the slots of 20x20 aluminum

bars using a ﬂat-head screwdriver. The acrylic panel can then be inserted inside the

rubber trim which is inside the slots. Typically you'd want to do this on the horizontal

20x20 beams, although theoretically it would work just as well using the vertical

beams.

Rubber Trim Piece Distribution

3. Tight the t-nuts on the Braces 

Assembly of the front and left-side panels is now complete so any t-nuts that were

loosed during those steps can now to be rightened. The printer should now have the

front and left-side panels installed. 