esera automation 11302-U Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Adaptador esera automation 11302-U. esera automation 11302-U 6 páginas. 1-wire bus coupler usb v3
Imprimir página3
Technical data
1-Wire Bus
Interface:
Protection circuits:
Connection:
Output voltage:
Isolation:
Isolation:
Voltage supply:
Power consumption:
USB Interface
Connection:
Interface:
4
Ambient Conditions
Temperature, operation: 0 °C up to +60 °C
Air humidity:
Dimensions:
Protection class:
Protection type:
Insulation:
5
Conformity
EN 50090-2-2
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, Fault-free operation
EN 61000-6-3, Stray radiations
RoHS
6
Connection plan
Connection 1-Wire Bus
(module topside)
7+8
= 1-Wire load
9+10 = 1-Wire data
11+12 = + 5 V output
Voltage supply of 9 – 30 VDC
(module bottom side)
1 = Voltage Supply negative
2 = Voltage Supply positive
3-6 = not assigned
Note: Further information and tips for the 1-Wire bus system can be found in our webshop at
https://www.esera.de/1-wire-grundlagen/
support/dokumentation/352/grundlagen-1-wire-bus-ebook?number=11901)
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change. ESERA-Automation, E-Service GmbH 2019
www.esera.de
1-Wire Bus with DS2480 bus master component (5 V, load und data)
ESD- and reverse polarity protection
Screw terminals (up to 2,5qmm cross wire section)
5 V (+/-10 %), maximum 500 mA
Galvanic separation between data input, voltage supply
and 1-Wire interface
minimally 500VDC between PC interface and 1-Wire bus
9-30VDC
maximally 500mA
USB type B connection jack
USB 1.1, FTDI 232RL Chip
10 – 92 % (non-condensing)
35 x 90 x 70mm (WxHxD)
III
IP20
500 VAC output to 1-Wire Bus, 250 VAC output to output
or in our eBook at
11302-U V1.5 R1.2 Manual
(https://www.esera.de/service-
Page 2 of 6