DivioTec NDR255P Manual rápido

Procurar online ou descarregar pdf Manual rápido para Câmara digital DivioTec NDR255P. DivioTec NDR255P 2 páginas. Full hd extreme wdr dome network camera

Imprimir página
This guide is for quick installing and connecting the Full HD Multi-Streams Ultra-WDR Mini Dome IP Camera.
For more details, please refer to the User's Manual of the camera in the supplied CD.
Camera's Connectors
No.
Connector
Pin
1
RJ-45
-
For network and PoE connections
1
DC 12V
2
Power (DC 12V / AC 24V)
2
DC 12V Reserved
3
DC 12V GND
-
Insert the microSD card into the card slot to store videos and
3
microSD Card Slot
snapshots. Do not remove the microSD card when the camera is
powered on.
4
BNC *
-
For analog video output
1
Alarm In –
2
Alarm In +
3
Alarm Out –
4
Alarm Out +
5
Alarm & Audio I/O
5
Audio Out L
6
Audio Out R
7
GND
8
Audio In
Press the button for at least 20 seconds with one finger to restore
6
Default Button
-
the system to factory default settings.
(*) Optional
NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to
support long term continuous data read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and the life expectancy.
Camera Cabling
Please follow the instructions below for cable connections.
Power Connection
Please use a DC 12V / AC 24V power adaptor and plug it to the camera and the power outlet. Alternatively, users can
use an Ethernet cable and connect it to the RJ-45 connector of the camera and a Power Sourcing Equipment (PSE)
switch.
NOTE: If PoE is used, make sure PSE is in used in the network.
Ethernet Cable Connection
Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to
the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the
PC.
Full HD Extreme WDR Dome Network Camera NDR255P Quick Guide
Definition
Remarks
AC 24V 1
AC 24V GND
Power connection
AC 24V 2
Alarm connection
Audio Out
NOTE: Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, please
check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
Function Cables
No.
Connector
Pin
1
RJ-45
-
For network and PoE connections
1
DC 12V – / AC 24V 1
2
Power (DC 12V / AC 24V)
2
GND
3
DC 12V + / AC 24V 2
1
Alarm In –
Alarm I/O
2
Alarm In +
3
(4-Pin Terminal Block)
3
Alarm Out –
4
Alarm Out +
Green
Audio Out
4
Audio I/O
Pink
Audio In
5
BNC
-
For analog video output
Please refer to Default Button in the table under
-
Default Button
-
Connectors (Indoor
Before Login to the Camera
A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the
camera, please ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and
plug-ins or setting Internet's security level to default. For further details, please refer to the User's Manual in the
supplied CD.
ActiveX Controls and Plug-ins Settings
Step 1: Start the Internet Explorer (IE).
Step 2: Select <Tools> from the main menu of the
browser. Then click on <Internet Options>.
Step 3: Click on the <Security> tab and select
<Internet>, and click on <Custom level> to
change ActiveX settings.
Step 4: Set "ActiveX controls and plug-ins" items to
<Prompt> or <Enable>.
Definition
Remarks
Power connection
Blue
Green
Yellow
Orange
Two-way audio transmission
Camera's
Only).
Internet Security Level
Step 1: Start the Internet Explorer (IE).
Step 2: Select <Tools> from the main menu of the
browser. Then click on <Internet Options>.
Step 3: Click on the <Security> tab and select
<Internet>.
Step 4: Down the page, click <Default Level> and click
on <OK> to confirm the setting. Close the
browser window, and open a new one later for
accessing the IP camera.