3DUpFitters Taz6 Enclosure Kit Manual de instalação - Página 9

Procurar online ou descarregar pdf Manual de instalação para Impressoras 3D 3DUpFitters Taz6 Enclosure Kit. 3DUpFitters Taz6 Enclosure Kit 15 páginas.

Imprimir página

4. Assemble Door

Attach the hinges to the outside of the door frame using M4 cap head 12mm screws

and nuts. There will be some play in the hole size so that you can adjust the door to

swing freely. Be sure to insert the interior door the same way you removed it from the

front panel. There can be slight variations in the laser angle, so the door works best if

the same orientation.

Attach the doorknob by ﬁrst inserting the square M4 nut into the slot. Use a 16mm

cap head screw to attach the door.

Attach the strike plate by attaching the adhesive

rubber backing to the acrylic. The black square strike

plate should then ﬁt snuggly over the backing. If there

is slippage, bend the strike plate slightly.