Divus OPTIMA RC3 Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Servidor Divus OPTIMA RC3. Divus OPTIMA RC3 16 páginas. Knx server

www.divus.eu

KNXSERVER - Quick start guide OPTIMA RC3

The first access

If you are trying to connect to KNXSERVER for the first time, please proceed as

listed below:

Connect the power cable and a network cable to DIVUS KNXSERVER and wait around

1 minute until the system is ready.

If KNXSERVER is connected directly to your computer, please use a cross-over cable;

otherwise (if KNXSERVER is connected to a hub/switch/router) use a normal cable.

At delivery KNXSERVER has the following network address (default configuration):

If your network does not support this address, proceed as follows:

Edit temporarily your network connection parameters as shown in the following

pictures, in order to be able to communicate with the server

Open the network connection status window by double-clicking the icon in the

taskbar or in the network connections (Windows control panel) and click on

"Properties".

Select "Internet protocol (TCP/IP)" among the available components, then click on

the "Properties" button again.

Set an IP address manually using the settings as shown in the figure above on the

right.

192.168.0.110

Page 3/16