ESI Neva Duo Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de gravação ESI Neva Duo. ESI Neva Duo 16 páginas. 24-bit / 192 khz usb-c audio interface with 2 microphone preamps
Também para ESI Neva Duo: Manual de início rápido (3 páginas)

Imprimir página

ESI

Neva Duo

This dialog allows you to virtually connect playback (output) channels and input channels with virtual

cables on the screen.

The three main columns are labeled INPUT (the physical hardware input channel), WDM/MME (the

playback/output and input signals from audio software that use the Microsoft MME and WDM driver

standard) and ASIO (the playback/output and input signals from audio software that uses the ASIO

driver standard).

The rows from top to down represent the available channels, first the two physical channels 1 and 2

and under it a pair of VIRTUAL channels numbered 3 and 4. Both the physical and virtual channels

are represented as separate stereo WDM/MME devices under Windows and in your applications and

also as channels accessible via the ASIO driver in software that uses that driver standard.

Finally, the MME/WDM and ASIO playback can be muted (= not sent to the physical output) by

clicking on OUT if required.

DirectWIRE example

For further explanation, let's look at the following example configuration. Please note that every

application of DirectWIRE is specific and there is hardly any universal setup for certain complex

requirements. This example is simply to illustrate some of the powerful options:

You can see here connections between ASIO OUT 1 and ASIO OUT 2 to WDM/MME VIRTUAL IN

1 and WDM/MME VIRTUAL IN 2. This means that any playback of an ASIO application via channel

1 and 2 (for instance your DAW) will be sent to the WDM/MME wave device 3/4, allowing you to

record or maybe live stream the output of the ASIO software with an application that records on

channel 3/4.

You can also see that the playback of channel 1 and 2 (WDM/MME OUT 1 and WDM/MME OUT 2)

is connected with the ASIO input of channel 1 and 2 (ASIO IN 1 and ASIO IN 2). This means that

anything any MME/WDM compatible software plays on channel 1 and 2 can be recorded / processed

as input signal in your ASIO application. This signal cannot be heard via the physical output of Neva

Duo since the OUT button is set to mute.