ESI EPPA2-KIT Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Racks & Stands ESI EPPA2-KIT. ESI EPPA2-KIT 12 páginas. Dual monitor arm conversion

EPPA2-KIT

Install Cable Covers

• Install the upper cable cover with the monitor cable and power cord

captured. Pull apart slightly the upper and lower ends of the cover to fit

it over the mounting holes on the monitor arm.

• Then slide the lower cable cover onto the monitor arm with the cable

and cord captured.

• Repeat these cable management procedures for the second

monitor arm.

Monitor Arm Adjustments

There are two possible adjustments, both of which are made using the 6mm Allen key.

1. Monitor weight adjustment.

— If the monitor arm is difficult to raise or drifts lower, increase the weight adjustment. Turn the hex nut

counterclockwise.

— If the monitor arm is difficult to lower or drifts higher, decrease the weight adjustment. Turn the hex nut

clockwise.

— After completing the adjustment, the monitor arm should raise and lower easily, and maintain its

position.

2. Monitor tilt adjustment.

— Loosen the nut to make tilting the monitor easier or tighten the nut to hold the tilt position more

securely.

6mm

Allen Key

1. Monitor Weight

Heavier

Monitor

Lighter

Monitor

2. Monitor Tilt

ADJUSTMENTS

6mm

Allen Key