ACOUSTIC SOLUTIONS 8994754 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Altifalantes ACOUSTIC SOLUTIONS 8994754. ACOUSTIC SOLUTIONS 8994754 10 páginas.

Imprimir página

Operation

Charging Your Speaker

1. Use the type-C power cord in the accessories to connect the DC 5V charger and speaker

for charging.

2. The orange power LED will turn on to indicate that the unit is charging. then will turn off

when fully charged.

Note: A full charge takes approximately 3 hours.

WARNING!

A wet or contaminated USB charging connector may cause excessive heat or

melting and may lead to fire damage or personal injury. Always charge your speaker with a

clean, dry USB Type-C connector.

Power On / Power Off

Power on: Press and hold the

The working state LED will flash.

Power off: Press and hold the

The working state LED will turn off.

Pairing Bluetooth Devices with Your Speaker

The speaker will not automatically connect to a new device when power on. In order to pair

your Bluetooth audio device with your Bluetooth Speaker for the first time, follow the steps

below:

1. Power on your speaker, the working state LED will flash in green.

2. Enable Bluetooth on your devices (phone or audio device). Refer to the manufacture's

instructions for details.

3. Search for Bluetooth devices and select "Acoustic Solutions Q28S ". If required, enter the

password "0000" to confirm and complete the pairing process.

4. The speaker will beep when the devices are paired. And the working state LED will turn to

green.

Note: The speaker will power off automatically if no connection within 20 minutes.

Bluetooth Music Playback

1. Open the music player and select a song to play. Press the

2. Click the + button to increase the volume or long press to skip to the next song.

3. Click the - button to decrease the volume or long press to skip to the previous song.

Bluetooth Phone Calls

1. Click the

button to answer an incoming call. Click again to end the call.

2. Press and hold the

AUX IN

1. Use the 3.5mm audio cable in the accessories to connect the audio source equipment and

speaker.

2. Turn on the audio source device and play music.

3. Press the

button to play or mute the speaker.

Need technical support? Call our experts on 0345 604 0105 or go online at www.argos-support.co.uk

button for 2 seconds to power on the speaker.

button for 2 seconds to reject the call.

Bluetooth Speaker | Instruction Manual

pause / play the music.