ClearLink 905 Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Rádio bidirecional ClearLink 905. ClearLink 905 10 páginas.

Imprimir página
Call Waiting
The call waiting feature is unique to the ClearLink branded radios and offers a valuable feature for those
who want to monitor more than one or two channels at a time. To enable this feature do the following:
1.
Select the first channel to monitor. Press and hold the "CW" button for 5 seconds, the heart icon
will appear on the display.
2.
Select the second channel. Press and hold the "CW" button for 5 seconds until the heart icon
appears.
3.
To set additional channels repeat the above process.
4.
Once selection is complete press and release "CW" and the radio will begin monitoring both
channels.
When the radio hears activity on either channel, monitoring will stop on that channel for 5 seconds and then
resume monitoring both channels selected. To remain on the channel on which activity was detected push
the "PTT" button. This will deactivate call waiting and allow you to communicate normally.
Programmable Memory Channels
The ClearLink 905 has the ability to remember up to 10 different channel settings. To enter channels in
memory:
1.
Choose the desired main channel by pressing and releasing the "UP" or "DOWN" button. To enter
in memory, press the "F" button then press and hold the "ME" button for 5 seconds. The "M" icon
will appear on the display and the memory channel number will flash in the lower left of the display.
2.
Select a memory channel by pressing and releasing the "UP" or "DOWN" channel buttons. If the
memory channel you want to program is the displayed then press PTT button to lock that channel
into memory
Reading Memory Channels
1.
Press the "F" button and then press "ME". A memory channel will be displayed. This will be the
location without the "M" above the number. If the number is flashing this indicated the memory
channel is not programmed.
2.
Press and release the "UP" or "DOWN" button to select a memory channel previously programmed.
To exit this mode, press "F" button and press "ME".
Worth Noting.
•
Do not attempt to remove or otherwise adjust the radio antenna.
•
The LED display on the ClearLink 905 is sensitive to extreme temperatures and humidity. Exposing
the radio to temperatures below - 50 F (- 20 C) or above 140 F (60 C) may cause permanent
damage.
•
The ClearLink 905 is moisture resistant; it is not waterproof. Avoid immersing it in water or other
liquids.
•
Keep the ClearLink 905 out of direct sunlight.
Optional Accessories
The following accessories generally are available through your local
retailer. If your retailer does not stock the accessory you wish to purchase, please call us at 000-000-0000
for pricing and ordering information.
Item
Item #