dixell XJ200 Instruções de instalação e de utilização

Procurar online ou descarregar pdf Instruções de instalação e de utilização para Unidade de controlo dixell XJ200. dixell XJ200 3 páginas. Communication module

Imprimir página

1. GENERAL WARNING

1.1

TO BE READ BEFORE USING THIS MANUAL.



This manual forms an integral part of the product and must be kept near the device

for easy and quick consultation.



The device must not be used for purposes different than those described below and

particularly, it cannot be used as a safety device.



Verify the limits of application before proceeding.

1.2

SAFETY PRECAUTIONS



Verify that the connections comply with the instructions in this manual before

connecting the device.



Do not expose the unit to water or humidity: use the device only within the

stipulated working limits, avoiding sudden changes in temperature and high

atmospheric humidity in order to prevent condensation from forming.



Caution: disconnect the electrical connections of the device before any

maintenance.



The module must never be opened.



If the device is faulty or malfunctions, return it to the retailer or to "DIXELL s.r.l."

(refer to address) with a precise description of the fault.

2. GENERAL DESCRIPTION

The wireless communication modules of the XJ200 range are a radio communication

system for Dixell monitoring systems.

The iCOOLL range consists of the XJ200 radio module and its power supplier PW-200J.

XJ200 can cover a variety of functions within the monitoring network:

Master: when it is connected to the X-WEB monitoring system.

Slave/Repeater: when it is connected to the subnets of devices equipped

with RS485.

Repeater: when it is assigned the function as a simple bridge towards other

subnets that cannot be reached directly by the master.

The XJ200 modules enable 2-way communication between Dixell devices/modules

equipped with an RS485 output that are appropriately connected to each other and the

monitoring unit of the X-WEB ranges, thereby replacing the connection via an RS485

cable.

Up to 200 devices can be connected to the same XJ200 (communication between the

module and the devices is via RS485), thereby covering several workstations with the

same communication module.

The maximum distance possible between the XJ200 modules in an open space (with no

obstacles) is 200 metres. This distance can be remarkably reduced in the presence of

interference such as radio emitters, generators of electrical or magnetic fields that can

affect the proper communication between the XJ200 modules.

The range of serial addresses allowed on the instruments connected to the iCOOLL

modules is from 1 to 244.

N.B. In order to work with the iCOOLL modules, the instruments must be equipped with

an RS485 serial port and use ModBUS-RTU communication protocol.

3. FRONT PANEL

LED: the module has a few LED signals

POWER

Green - Flashing with a frequency of 1 Hz: the module is ON and running

RS485

Yellow - Data is being transmitted/received via RS485 by the module

RADIO

Green -The module is transmitting via radio

1592010320 XJ200 GB r1 3 24 10 2014-FCC

XJ200

4. INSTALLATION AND ASSEMBLY

4.1 PACKAGE CONTENTS

Sponge

1. Xj200

2. Screws

Each XJ200 package contains the following components:

XJ200 radio device

2 self-tapping screws 3.9x6.5T to fix the XJ200 to the fixing bracket

Wall fixing bracket

Instructions manual

4.2 TOOLS TO FIX THE XJ200

4.2.1 DIRECT FIXING TO THE WALL

Parts required for assembly (not supplied)

To fix the module directly to the wall, use the cut out below to make the 2 holes

"B" at the distance indicated in fig. 1.

TOP

Fix the XJ200 to the head of the screws by rotating the container appropriately

XJ200

4. Manual

3. Bracket

2 x

80.00mm (3.15")

60.00mm (2.36")

Ø MAX 6mm (0.2")

CABLE

Fig. 1

Insert the dowels and fix the screws with

a maximum distance of 8 mm from the

head to the wall

Ø 5 mm

1 / 3