Alto-Shaam ITM-72 Manual de utilização e cuidados - Página 3
Procurar online ou descarregar pdf Manual de utilização e cuidados para Merchandiser Alto-Shaam ITM-72. Alto-Shaam ITM-72 12 páginas. Island takeout merchandiser
Também para Alto-Shaam ITM-72: Brochura e especificações (4 páginas)
C A R E a n d C L E A N I N G
The cleanliness and appearance of this
unit will contribute considerably to
operating efficiency and savory,
appetizing food. Good equipment that
is kept clean works better and lasts
longer.
Thoroughly clean the island merchandiser
unit daily.
1. Turn lights and adjustable thermostat(s) to the
"OFF" position.
2. Disconnect unit from power source by turning breaker
switch to the "OFF" position. Let the unit cool.
3. Remove and store unused products under refrigeration.
4. Clean the interior metal surfaces of the
cabinet with a damp cloth and any good
alkaline or alkaline chlorinated based
commercial detergent or grease solvent at
the recommended strength. Use a plastic
scouring pad or oven cleaner for difficult
areas. Avoid the use of abrasive cleaning
compounds chloride based cleaners, or
cleaners containing quaternary salts. Rinse
carefully to remove all residue and wipe dry.
NOTE: Never use hydrochloric acid (muriatic acid) on
stainless steel.
5. Clean glass and heat guard with a window cleaner.
6. To help maintain the protective film coating on
polished stainless steel, clean the stainless steel exterior
of the unit with a cleaner recommended for stainless
steel surfaces. Spray the cleaning agent on a clean
cloth and wipe with the grain of the stainless steel.
7. Clean any other outside surfaces with hot water,
detergent and a clean cloth. Rinse carefully and dry.
Always follow appropriate state or local health
(hygiene) regulations regarding all applicable
cleaning and sanitation requirements for food service
equipment.
Remember to turn the breaker switch ON again before
operating the unit.
Use caution when replacing hot bulbs.
This unit's performance has been optimized
using factory provided bulbs. These bulbs
should be replaced with an exact substitute or
with a factory recommended replacement.
#880 Operation & Care Manual • 2
Disconnect unit from power source
before cleaning or servicing.
At no time should
the unit be flooded with
water or liquid solution.
NEVER STEAM CLEAN.
Severe damage or electrical
hazard could result,
voiding the warranty.