ClearOne MAX IP Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Telefone de conferência ClearOne MAX IP. ClearOne MAX IP 6 páginas. Conferencing phone
Também para ClearOne MAX IP: Ficha de especificações (3 páginas), Ficha de dados (2 páginas), Manual de Interoperabilidade (4 páginas), Brochura (2 páginas), Manual do utilizador (7 páginas), Manual do utilizador (6 páginas)
Imprimir página
USING THE PHONE IN A THREE-WAY CALL
1. Press the
>
Press the
2. Press the
3. If either of the other parties hangs up during the three-way call, the remaining party stays connected to the
call.
TO MAKE AN OUTBOUND CALL WHILE ON ANOTHER CALL
1. Press the
a second line dial tone.
2. Dial the second party's phone number.
>
If you receive a busy signal or are routed to voicemail, then press the
return to the first party.
3. Press the
>
TO ACCEPT AN INBOUND CALL WHILE ON ANOTHER CALL
1. The phone rings (unless the ringer is muted) and the LEDs flash green.
2. Press the
the incoming call.
>
3. Press the
>
TONES AND ALERTS
4
Technical Services: 800.283.5936
key to place both lines on hold.
HOLD
Note: The LEDs flash red when a call is on hold.
key a second time to take both lines off hold.
HOLD
key to hang up both lines.
ON/OFF
key and then press the
HOLD
Note: Stored numbers are not available for dialing a second party.
key to toggle between the first and second parties.
HOLD
Note: You cannot join the first and second parties together in a three-way call after calling the
second party in this fashion; a three-way call must be initiated by pressing the
as explained above (see
TO MAKE AN OUTBOUND THREE-WAY CALL
key and then press the
HOLD
Note: If you want to disconnect the incoming call after answering it, press the
the second call and then press the
key to toggle between the first and second parties.
HOLD
Note: You cannot join the first and second parties together in a three-way call after answering an
incoming call; a three-way call can only be initiated as an outbound call (see
for more information).
THREE-WAY CALL
Tone/Alert
Description
A tone will play upon successful programming entry.
Confirmation
A tone will play if you attempt to do any of the following:
Reject
• enter an invalid programming entry
• use a speed dial key that has not been programmed
• enter a 45th digit when predialing
• enter a 17th digit for user phone number
• enter a 31st digit for speed dial key (One-Touch
key. The first party is put on hold and you are connected to
ON/OFF
key. The first party is put on hold and you are connected to
ON/OFF
key to take the first party off of hold.
HOLD
(One-Touch Conferencing or service center)
Conferencing or service center)
key to terminate the call and
ON/OFF
CONFERENCE
for more information).
key to hang up
ON/OFF
TO MAKE AN OUTBOUND
FIGURE 6
MAX IP tones and alerts
key first,