Camos CX-100 Manual de instruções - Página 12
Procurar online ou descarregar pdf Manual de instruções para Acessórios para automóveis Camos CX-100. Camos CX-100 14 páginas. Rear-view system 5” tft lcd monitor & camera
Imprimir página
Installation
Usually the transmitter and receiver module must be mounted inside the
vehicle.
The transmitter should be attached as high as possible in the rear of the
vehicle. It can simply be fixed by screw or the enclosed adhesive/Velcro
tape.
The receiver should be installed, if possible, in the same high like the
transmitter, for example on the dashboard close to the monitor.
To achieve best transmission, you should avoid obstacles (walls, persons,
etc.) between transmitter and receiver.
Metallic barriers may completely impede the transmission; in this case you
have to change the position of the modules.
Using a (camping) trailer, the receiver can be installed in the rear of the
vehicle (if coverage is insufficient).
In this case the receiver module must be connected to the monitor with an
additional extension cable (available from specialized dealers).
Due to technical factors it is possible that the range of the video signal is
higher than the range of audio signal - especially in threshold areas (noise,
interference).
In this case we would recommend to reduce the monitor's volume.
Camera
Receiver
Transmitter
Monitor
Tail Light
2