Camos RV-531 Manual de instruções - Página 13
Procurar online ou descarregar pdf Manual de instruções para Acessórios para automóveis Camos RV-531. Camos RV-531 14 páginas. Rear-view system 5” tft lcd monitor & camera
Imprimir página
Connections / Alignment
DIP switches
Control lamp
On/Off switch
Receiver:
Connect the black cable of receiver module to the camera input of the
monitor. Concerning the other connections of the monitor, please see the
manual of rear view system.
Transmitter:
Connect the camera cable to the cable of the transmitter module.
Pls pay attention that the marker (arrow) on the plug and jack correspond.
Connect the black cable to ground (-), the red cable to the positive pole of
the tail light. Please use the enclosed extension cable (red/black).
Switch on both units (transmitter and receiver).
Once changed to reverse, the rear view system automatically turns on.
Setting up the radiochannels
In case of interferences during the transmission you should select another
channel:
Switch off both units. Use a small screw driver, a ball-pen or similiar
to position the DIP switches as you see below (push them carefully up resp.
down). You have to effect the settings both at the transmitter and the
receiver. In the following switch on the modules again.
channel 1
channel 2
channel 3
channel 4
3