ClearOne FlexCam USB Manual de instalação e operação - Página 6

Procurar online ou descarregar pdf Manual de instalação e operação para Câmara de segurança ClearOne FlexCam USB. ClearOne FlexCam USB 10 páginas. Flexible camera series
Também para ClearOne FlexCam USB: Manual do utilizador (14 páginas), Manual do utilizador (12 páginas), Manual de instalação e operação (12 páginas)

Imprimir página

IllumaBase

keypads

There are six buttons on the two IllumaBase keypads on the TeachCam. Below is a list

of their functions.

Using the StudentCam and IDCam

The StudentCam and IDCam each have a three-button keypad for brightness and

flicker control.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Using the Camera

Camera Care

Handling the camera

• All ClearOne cameras are for indoor use only.

• Use only ClearOne power supply and a wall-mounted, electrical outlet.

• Do not use cameras next to food or beverages. Cameras have been tested and

approved for use in chemistry labs. However, be very careful not to spill liquid

or dry chemicals, or solvents on the camera.

• Do not use cameras right next to working TVs, radios, motors, transformers or

magnetic fields.

• Avoid touching the lens. To clear any dust, blow pressurized air onto the lens.

For accidental smears or smudges, wipe carefully with a lens cleaning cloth.

• Clean exterior of camera by wiping with a clean, damp cloth; do not use any

abrasive chemicals.

• Use both hands whenever adjusting the neck of the camera; this will avoid any

unnessary strain on the camera's base and will keep the camera from tipping

over unexpectedly.

• Do not attempt to take the camera apart. There are no user-serviceable com-

ponents inside.

Camera base

The camera base has five rubber feet for non-slip support of the camera.

Camera head

This pre-assembled unit contains the camera lens, lens holder, focus ring attach-

ments, connections to gooseneck and all cables. Do not turn camera head more than

30° left or 30° right.

Camera lens and lens holder

The camera lens is held in place by the lens holder. Both are permanently attached to

the camera head. Do not try to rethread or unscrew the lens holder.

Gooseneck

Use the gooseneck to adjust the camera head/camera lens over the projected image.

Do not bend the gooseneck more than 90° in any direction or attempt to tie it in a

knot. Do not attempt to repair any cracks in the vinyl coating.The gooseneck is non-

detachable and should be replaced only by ClearOne.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760