1 BY ONE Audio-Technica AT3600 Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Gira-discos 1 BY ONE Audio-Technica AT3600. 1 BY ONE Audio-Technica AT3600 14 páginas. Belt drive turntable with built in speakers

Imprimir página

Troubleshooting

Problem

Solution

The platter does

• Is the AC adapter connected to the outlet?

not spin.

-Connect the AC adapter to the outlet.

• What's the status of the indicator light?

- Power is on, but the indicator light is oﬀ. That means the

turntable is in ERP mode. Turn oﬀ the power switch and turn on

again to reboot the turntable.

- The indicator light is blue. That means the turntable is in

Bluetooth mode. Please slide down the BT/LP Mode Selector to

choose LP mode.

- The red indicator light will indicate LP mode.

• Has the belt slipped from the platter?

-Correctly place the belt on the platter.

• Is the belt placed on the motor pulley?

- Check that the belt is placed on the motor pulley (brass-colored)

correctly.

• Has the belt been damaged?

-Replace it with a new belt.

• Is the AUX-IN cable pluged in?

- AUX-IN function is a ﬁrst-priority function. Please unplug the

AUX-IN cable before using the BT/LP functions.

The platter spins,

• Is the stylus damaged?

but there is no

-Check the stylus and replace it, if necessary. It's suggested to

sound from the

replace the stylus after 400 hours of use.

turntable?

• Is the stylus placed correctly on the body of the cartridge?

-Check the cartridge and adjust it, if necessary.

The stylus skips.

• Is the record warped?

-Check the record.

• Is the record scratched?

-Check the record.

• Is the stylus pressure correct?

-Refer to "Cartridge Tracking Force Adjustment" to readjust the

tracking force.

The turntable is

• Is the product picking up excessive vibrations from the ﬂoor,

making a strange

surfaces of the walls, or nearby speakers?

'howling' sound.

-Decrease the vibrations or mount the product on a surface that

is not subject to the eﬀects of vibrations.

• Is the product mounted on an unstable surface?

-Check whether the surface on which the product is mounted is

suitable.

There is noise

• Is there dust on the cartridge's stylus tip?

when the record

-If dust is stuck to the stylus tip, clean it with a commercially sold

is playing.

brush.

The sound when

• Are the speed settings for this product correct?

the record is

-Please select the correct speed for the type of record being

playing is either

played.

too fast or too

slow.

Playback speed

• Is the belt stretched out?

slows down or

-Replace with a new belt.

there is irregular

• Is the belt installed correct?

rotation.

-Refer to "Turntable Platter and Belt Setup" to setup the belt.