Akiyama SIRION Manual do utilizador - Página 16

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de gravação Akiyama SIRION. Akiyama SIRION 19 páginas. Midi dj controller

OPENAND COLAPSE FOLDERS:
Being at Folders tree perform the following procedure:
1- Press LOAD A/BACK to open selected folder. In this
case folder name is "Music".
2- Turn the control
to select between
the sub folders
3- Repeat operation (1) to
colapse the folder
3
1
2
SETTINGA CUE POINT WITH PRECISSION:
Enter Pause mode and turn the wheel. Yoou can select a time point with total precission.
1-
Enter Pause mode
2- Turn the wheel to scroll through the blue track level graph. Select
the point where you want the CUE, normally before a beat
HOT CUE. MEMORIZATIONAND REPRODUCTION:
Hot Cue points are stored and reclaimed as follows:
1- Press Shift and one of the three buttons at the draw (right).
Once Hot Cues are stored we can claim them by repeating the procedure. i.e. Shift + the
button where is stored the desired Hot Cue.
We can change only the last stored Hot Cue. Press Set Cue and the new Hot Cue is set
SETTINGAN AUTOLOOP:
Once the length is set press OUT button (it will light) and the Autoloop starts playing. To exit
theAutoloop press OUT again (lights off).
Being in Autoloop or Loop we can change the length in real time by doing the same operation
(see draw below):
/2
IN
Perform this procedure for shorten or lengthen the Loop.
SHORTEN/LENGTHENALOOP:
Firs we have to set a Loop with IN and OUT buttons. Once the Loop is playing we can change the length in real time as seen at the Autoloop section. See draw
below:
Loop
/2
IN
Loop start point
BACK
LOAD A
TRACK
ENTER
AUTO LOOP
X2
SHIFT
OUT
AUTO LOOP
X2
Shorten/Lengthen the Loop >
OUT
Loop end point
SHIFT
recognizable by the blue square or the pic at the graph.
3- Press CUE or Set Cue to set the CU point
SHIFT
/2
IN
Shorten
HOT CUE 1
HOT CUE 2
SET CUE
CUE/PLAY
HOT CUE 1
HOT CUE 2
AUTO LOOP
/2
X2
SHIFT
IN
OUT
AUTO LOOP
X2
SHIFT
OUT
Lengthen
HOT CUE 3
SET/PLAY
HOT CUE 3
15