CLEARPATH DINGO Manual do utilizador - Página 15

Procurar online ou descarregar pdf Manual do utilizador para Robótica CLEARPATH DINGO. CLEARPATH DINGO 20 páginas. Indoor platform

4 CHARGING & BATTERY MAINTENANCE

When finished with the Dingo, press and release the power button

charging.

Dingo's batteries are charged outside the Dingo using the charger(s) provided.

Alternatively, if you have multiple batteries, you can hot-swap them one at a time. The system will remain operational

while hot-swapping as long as there is at least one battery in the system or the system is connected to shore power

prior to removing the batteries. Note that plugging in shore power will engage a motor stop and it is not possible to drive

Dingo while connected to shore power.

The Sealed Lead Acid batteries have overcurrent protection in the form of an ATO fuse. The Lithium-Ion batteries include

integrated protections against fault due to overcurrent, overdischarge, and short circuit. The batteries are rugged and

designed for the demanding environments into which Dingo may be deployed.

However, please take note of the following:

• SLA batteries must be charged while in a 0 to 45

• Li-Ion batteries must be charged while in a 0 to 50

• The batteries must not be punctured or disassembled.

• The batteries should be dropped off or delivered to your local hazardous waste authority for disposal.

• When traveling with Dingo, consult your airline's restrictions regarding lithium batteries (if applicable). If possi-

ble, bring the batteries in your carry on luggage, where they will be subject to normal cabin temperatures and

pressures.

Please contact Clearpath Robotics for additional information about Dingo's batteries or for information about purchasing

additional batteries.

Rev. 1.1.0

to power it off. Then remove the batteries for

◦

C range and discharged while in a

◦

C range and discharged while in a

◦

30 to a 60

C range.

◦

20 to a 60

C range.

Dingo