Altor ATDAC-10S7 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Altor ATDAC-10S7. Altor ATDAC-10S7 8 páginas.

Using external amplifier control:
ATDAC-10S have galvanic isolated digital (dry contact, i.e. - open collector) output which
is dedicated to control the external amplifier. Dry contact is closed (short) if ATDAC-10S
is not in standby. 3.5mm Jack is used for connection.
See below the electrical schematic of this output.
Cable recommendations:
Use only high quality cables according your preferences and possibilities!
Specially pay attention to the input cables:
USB cable: - do not use thin and very long cables. 0.5-1m is the reasonable length.
SPDIF cable: not all regular interconnect RCA cables are capable to operate in high
frequencies.
Optical TOSLINK cable: not enough quality cable may not operate in 192kHz or even at
96kHz sample rate. Also for some cheap cables degradation with time (aging) was
observed.
©2018.
10R
1
4
2
®Altor Co
3
4
2
5
1
6
Altor
A U D I O
Netanya, Israel