ClearSpan 103938 Manual de instruções - Página 2
Procurar online ou descarregar pdf Manual de instruções para Tenda ClearSpan 103938. ClearSpan 103938 15 páginas. Frame 20' wide x 20' long
Imprimir páginaCLEARSPAN
JUBILEE TENTS
™
YOU MUST READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE SHELTER.
Thank you for purchasing this ClearSpan™ shelter. When
properly assembled and maintained, this product will
provide years of reliable service. These instructions include
helpful hints and important information needed to safely
assemble and properly maintain the shelter. Please read
these instructions before you begin.
If you have any questions during the assembly, contact
Customer Service for assistance.
SAFETY PRECAUTIONS
•
Wear eye protection.
•
Wear head protection.
•
Wear gloves when handling metal tubes.
•
Use a portable GFCI (Ground Fault Circuit Interrupter)
when working with power tools and cords.
•
Do not climb on the shelter or framing during or after
construction.
•
Do not occupy the shelter during high winds,
tornadoes, or hurricanes.
•
Provide adequate ventilation if the structure is
enclosed.
•
Do not store hazardous materials in the shelter.
•
Provide proper ingress and egress to prevent
entrapment.
ANCHORING INSTRUCTIONS
Prior to assembling this shelter, please read the anchoring
precautions and instructions included with the kit.
Anchoring instructions are included in the MUST READ
document. You must anchor the shelter after the frame is
assembled and before the cover is installed.
WARNING: The anchor assembly is an integral part
of the shelter construction. Improper anchoring may
cause shelter instability and failure of the structure.
Failing to anchor the shelter properly will void the
manufacturer's warranty and may cause serious injury
and damage.
2
LOCATION
Choosing the proper location is an important step before
you begin to assemble the structure.
The following suggestions and precautions will help you
determine whether your selected location is the best
location.
•
Never erect the structure under power lines.
•
Identify whether underground cables and pipes are
present before preparing the site or anchoring the
structure.
•
Location should be away from structures that could
cause snow to drift on or around the building.
•
Do not position the shelter where large loads such as
snow and ice, large tree branches, or other overhead
obstacles could fall.
SITE
After choosing a location, proper preparation of the site is
essential. The following site characteristics will help ensure
the integrity of the structure.
•
The support structure must be level to properly and
safely erect and anchor the frame.
•
If the site is not level, use footing to provide a secure
base for the structure. Pre-cast concrete blocks,
pressure-treated wood posts, or poured footings are all
acceptable when properly used.
•
Drainage: Water draining off the structure and from
areas surrounding the site should drain away from the
site to prevent damage to the site, the structure, and
contents of the structure.
WARNING: The individuals assembling this structure
are responsible for designing and furnishing all
temporary bracing, shoring and support needed during
the assembly process. For safety reasons, those who
are not familiar with recognized construction methods
and techniques must seek the help of a qualified
contractor.
Revision date: 07.01.08