ClearSpan 103938 Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Tenda ClearSpan 103938. ClearSpan 103938 15 páginas. Frame 20' wide x 20' long

FRAME ASSEMBLY (CONTINUED)

ATTENTION: Once the holes of the rafters and the

couplers have been aligned and secured with a carriage

bolt and nut, secure each rafter pipe connection with a Tek

screw. Make sure the head of the Tek screw is drilled in a

position where it will not contact the main cover.

Connect the side rafters as shown in diagram below.

Secure each connection with a carriage bolt and nut.

TOP VIEW

Side Rafter

Side Coupler

Connect the base rafters as shown in the following

diagram. Secure each connection with a carriage bolt

and nut.

Revision date: 07.01.08

Side Rafter

CLEARSPAN

TOP VIEW

Base Rafter

ATTENTION: The following steps will require

assistance. Heavy lifting is involved. Height

assistance may also be required. If needed, use

ladders or steady platforms to safely elevate the frame.

Gather the eight (8) sections of #190P094D pipe, as

they will serve as the legs.

Starting with a corner, carefully hoist the roof section

of the frame high enough to slide a leg, holes first, into

the corner coupler. Align the holes and secure with a

carriage bolt and nut. Repeat this process at the other

three corners, and then add legs to the four sides.

Actual frame may differ from frame shown.

JUBILEE TENTS

™

Base Rafter