ClearSpan R035B00011A Manual - Página 4
Procurar online ou descarregar pdf Manual para Kit de estufa ClearSpan R035B00011A. ClearSpan R035B00011A 15 páginas. Greenhouse door kits
Imprimir páginaASSeMbLY PRoCeDuRe
Following the instructions as presented will help ensure
the proper installation of the end frame and doors. The
steps outlining the assembly process are as follows:
1.
Verify that all parts are included in the shipment.
Notify Customer Service for questions or concerns.
2.
Read these instructions and all additional
documentation included with the shipment before
you begin.
3.
Gather the tools, bracing, ladders (and lifts), and
assistants needed to install the doors and door
frame.
4.
Read the care and maintenance information at the
end of these instructions.
5.
Complete and return all warranty information as
instructed (if included).
uNPACK AND IDeNTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin.
1.
Unpack the contents of the shipment and place
where you can easily inventory the parts. Refer to the
Bill of Materials/Spec Sheets.
2.
Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you
have questions, consult the parts guide and all
diagrams for clarification, or contact customer
service.
NoTe: At this time, you do not need to open the
plastic bags containing smaller parts such as
fasteners and clamps (if equipped).
QuICK START DIAGRAMS
For a quick overview of the end wall, doors, and
components, consult the diagrams located at the back of
these instructions.
4
Important Information
PARTS IDeNTIFICATIoN
The following graphics and photos will help identify the
different hardware for each door kit. (Some parts are not
shown.)
Twin-Wall Polycarbonate Double Door Kit
(R035b00011A)
108553
Wafer head screw
End Cap
Corrugated Polycarbonate Double Door Kit
(R035b00011b)
FA4482B
Tek screws
End Cap
104213
Aluminum
U-Channel Profile
104548
102921B
Neo-bonded washers
104548
102921B & FA4484B
Tek Screws and neo-
bonded washers
108553
Wafer head screw
Revision date: 05.28.10