ClearView CleanCam 1006 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Acessórios para automóveis ClearView CleanCam 1006. ClearView CleanCam 1006 5 páginas.
Imprimir páginab. If the CleanCam is not selected by Hyperspace by default, you may have other TWAIN
drivers installed. In order for Hyperspace to select this device by default, uninstall other
TWAIN drivers or consult with your Epic representative for other options.
Hardware Set-Up
1. CleanCam-1016 (Hood Mount):
1. If using ClearView's mount:
i.
ii. Install the Hood Mount by attaching the magnet base to a magnetic surface on
iii. Loosen the universal ball joint adapter (point a.) and screw point c. into the
Attach the mounting arm to the magnet base using the provided hardware.
the hood body.
1. It is recommended to attach a ClearView-branded vinyl sticker to the
underside of the magnet mount before attaching the magnet to a hood.
This will help prevent metal-metal contact between the hood and
magnet base. U se caution when installing or repositioning the magnet
base . Any force not parallel to the surface of the hood may cause the
edge of the base to damage the hood. ClearView is not responsible for
any damage to property arising from improper installation or
repositioning of the mount.
a. Removal of the mount: The magnet mount is a semi-permanent
attachment. Depending on the magnetic properties of your
hood, it may take substantial force to remove the mount from
your hood. To avoid damage to the hood and mount, remove
the mount by applying force directly to the magnet base (not
the mounting arm) in a direction parallel to the hood surface
until the magnet reaches an edge of the hood and gently slide
the magnet off the hood.
¼"-20 attachment point on the top of the CleanCam.
1. Point b. should not be removed from the assembly as it provides an
easy method to tighten the screw attachment into the CleanCam and its
scored surface will prevent the connection from becoming loose.