ClearView Easy Slide Manual de instruções de montagem - Página 11
Procurar online ou descarregar pdf Manual de instruções de montagem para Acessórios para automóveis ClearView Easy Slide. ClearView Easy Slide 16 páginas.
Também para ClearView Easy Slide: Manual de instalação e do utilizador (6 páginas)
Imprimir página
Positioning the Slide
Place your fridge into the Easy Slide® and return the slide into stowed position. Test the
position of the Easy Slide® to ensure it remains clear of vehicle side trims and rear door in all
possible configurations, including closing the vehicle rear door with the Easy Slide® in its
secured stowed position. Take care when testing whether the vehicle rear door can be closed
without contacting the Easy Slide® handle or fridge.
If the Easy Slide® needs to be repositioned, simply remove temporary fixing screws and move
the Easy Slide® into desired location. Ensure the Easy Slide® does not extend further than the
drawer front panels.
Once the position has been finalised, drill through drawer timber top using an 8.5mm drill bit
through rear fixing holes on the Easy Slide® base plate.
Feed the supplied M8 mounting plate through the drilled holes from the underside of the
drawer top and tighten using M8 Nyloc nut and washer. With the rear of the Easy Slide®
secured, fully extend the tray assembly and repeat the mounting process at front fixing holes
on the Easy Slide® base plate.
Vacuum all swarf and the Easy Slide® is now ready for use.
IMPORTANT When fitting a fridge to the Easy Slide®, always use quality tie-
down straps and never travel with the fridge unrestrained.
clearviewaccessories.com.au
11