ClearView Eagle View DVR Kit Manual de instalação - Página 3

Procurar online ou descarregar pdf Manual de instalação para DVR ClearView Eagle View DVR Kit. ClearView Eagle View DVR Kit 4 páginas.

Imprimir página

DVR SET-UP

Once DVR powers up, the system will begin the Setup Wizard, and

guide you through the unit's initial set up. Using the mouse, click on

the pop-up on-screen panel to enter the

(both are "admin" as the factory default.)

should change the default log-in and password to your own at this

time. Make sure to write down this information in a secure, hidden

place somewhere in case you forget it. Note: For security

reasons, entering the wrong log-in and/or password 3 times

will result in system alarm and 6 login failures will result in

account lock. If you are locked out, please call tech support.

minutes of video from that channel. Zoom allows an electronic zoom on

the channel's video, by dragging the cursor to select the area to be enlarged. Record to USB allows up to 60

minutes of the selected channel's recorded video to be copied to a USB device (thumb drive, etc.) The "X" at

the left end of the bar closes this menu bar.

Congratulations – you have successfully installed your ClearView DVR!

NETWORK & ONLINE SETUP

Now that your ClearView video system is up & running, you can connect it to your network to view and work

with from a remote PC or Apple Mac computer on your network and online.

To start, plug in a Cat 5 network cable to the RJ-45 network port on the rear of the DVR, and then into an

available port on your network's router. Then, using the DVR's mouse and the on-screen menus as you did

above, log into the DVR, and from the Main Menu choose SETTING, then NETWORK. To enable your

For your security, you

Once you have

logged in, you will see your cameras in live view on screen

automatically, automatically be recorded to the hard drive, and

be ready to review from this screen.

To review recorded video, use the mouse to move your

cursor over any live camera video, and the menu below will

appear over the selected channel's video screen:

Playback allows you to

replay the last 5-60

network's router to link to the DVR, check the DHCP

button on the second line of the Network window, and your

router will assign the required information to put your DVR

on your network. This process may take a few minutes.

Once this process is completed, open an internet browser

window using Internet Explorer, and type in http:// followed

by the IP address assigned by your router. Your DVR

should show up, and is now accessible on your local

network. You may also wish to enable your DVR to be

viewed on the internet when you are away from your local

network – referred to as remote viewing.

Remote viewing on another PC or Mac will use the same

method you use on your local network computer, but the

DVR's output must be available on the internet so that

Playback Zoom Record to USB