ClearView HD168Bi Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Modulador ClearView HD168Bi. ClearView HD168Bi 9 páginas. Quad cvbs/hdmi hd encoder modulator
Também para ClearView HD168Bi: Manual do utilizador (10 páginas)

Imprimir página
ClearView HD168Bi Manual do utilizador
3.2.3 Step 2: Adjust RF
Click on
SETUP
then on
Setup/RF Out
Set your channel here.
The modulation parameters and output level are set here.
The IDs for each channel are set in these fields.
Key ID, TSID, ONID and NID are set here.
Make sure these IDs are different from each other and different from other modulators on the
same network.
The total bitrate set for each channel should not exceed the maximum as per the table on the next
page for modulation parameters set.
Be sure to always press the Save Settings to the left after selecting your option. After all settings
have been adjusted press the- Store Settings and Reboot System for them to be saved completely.
If the buttons turn grey while you are adjusting settings log out then back in again to activate them.
The
STATUS
but only shows you status of the device and changes cannot be made in this menu.