DIYtrade YR-P1012H Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de DJ DIYtrade YR-P1012H. DIYtrade YR-P1012H 9 páginas.

Imprimir página

(7CH）

DMX Protocol

Function

Description

CH1

Dimmer

RGBWA-UV linear dimmer, from dark to bright

CH2

R Dimmer

Red linear dimmer, from dark to bright

CH3

G Dimmer

Green linear dimmer, from dark to bright

CH4

B Dimmer

Blue linear dimmer, from dark to bright

CH5

A Dimmer

Amber linear dimmer, from dark to bright

CH6

U Dimmer

UV linear dimmer, from dark to bright

CH7

W Dimmer

White linear dimmer, from dark to bright

(11CH）

DMX Protocol

Function

Description

CH1

Dimmer

RGBAW-UV dimmer, from dark to bright

CH2

R Dimmer

Red linear dimmer, from dark to bright

CH3

G Dimmer

Green linear dimmer, from dark to bright

CH4

B Dimmer

Blue linear dimmer, from dark to bright

CH5

A Dimmer

Amber linear dimmer, from dark to bright

CH6

U Dimmer

UV linear dimmer, from dark to bright

CH7

W Dimmer

White linear dimmer, from dark to bright

CH8

Flash

Color flash speed adjust, from slow to fast

CH9

ColorMix

Color mixing adjusting

CH10

Stand alone

0-60: shade 61-120: skip 121-180: shade, skip

181-240: sound active flash 241-255: skip by

sound

CH11

Stand alone

DMX 9 stand alone speed and sound active

Speed

speed adjusting, from slow to fast

Machine Connection

Cable Connectors

Cables must have a male XLR connector on one end and a female XLR connector on the

other end.

A word on termination: DMX is a resilient communication protocol,

however errors still occasionally occur. Termination reduces signal errors, and therefore best

practices include use of a terminator in all circumstances. If you are experiencing problems

with erratic fixture behavior, especially over long signal cable runs, a terminator may help

improve performance.

To build your own DMX Terminator: Obtain a 120-ohm, 1/4-watt

resistor, and wire it between pins 2&3 of the last fixture. They are also readily available from

specialty retailers

Maximum 8 PCS fixtures connected by Daisy chain connection.

Master-Slave control model：

Set up one fixture as Master fixture(triggering),other fixtures as slave

fixtures(receiving trigger signals).Set up all fixtures same address value or

following DMX controller performance(Attention: all fixtures use the same DMX

channel-7 or 11CH)