ClearWater AQUA ELITE 50 Manual de instalação e cuidados - Página 14

Procurar online ou descarregar pdf Manual de instalação e cuidados para Equipamento de iluminação ClearWater AQUA ELITE 50. ClearWater AQUA ELITE 50 20 páginas.

Imprimir página

The amazing thing you will notice about the Aqua Elite 50 system is the clarity of the water.

You might initially notice the water getting cloudy the first couple of days. DO NOT BE ALARMED. THIS

IS NORMAL! You will want to clean or backwash your filter after the first week.

Visual Inspection

You will want to periodically inspect the power box in the evening to ensure the unit is

functioning correctly. Turn the system on temporarily, if needed. The indicator light,

located next to the output connector will glow a nice blue color. The ozone unit should

only be on when the pump is running.

To ensure that the venturi injector and bypass are working correctly, simply observe to

see if small bubbles are entering the pool and the "frothing" effect is taking place in the

clear window of the venturi manifold window.

Periodically check the unit intake vent holes for the unlikely event of debris accumulation. It is important these

vent holes are open for air to enter the ozone unit. Do not look directly into the vent holes when the UV bulb is

operating.

Plumbing Issues

Minor adjustment of the ball valve (when installing the manifold) may be required to divert water through the

injector. This may be true with two speed or variable speed pumps. Older versions of these adjustable speed

pumps do not adjust well and you will need to adjust the ball valve to accommodate flow through the venturi on

low speed.

There is an internal check valve in the venturi injector. In the unlikely event this area becomes clogged, it may

be cleaned by removing the nut/barb and a retaining rubber seal. Care should be used not to lose the internal

ball and spring while taking the rubber seal off. Clean and reinstall.

Q). SCHEDULED OZONE MAINTENANCE

There is very little maintenance required with the Aqua Elite 50 unit regarding the ozone production, however

we do strongly recommend you replace the ozone hose and the check valves once a year.

The ozone hose and check valves can be easily replaced in a few minutes. A complete package is available that

includes 8 feet of hose, two check valves, 6 hose clamps and 5 zip ties.

Replace ozone hose once a year

Order replacement part – OZ-HOSEKIT –

from your dealer. This complete package includes

8 feet of hose, two check valves, 6 hose clamps,

and 5 zip ties.

P). OZONE INSPECTION

Very Important that this is done once a year!