ClearWater AQUA ELITE 50 Manual de instalação e cuidados - Página 9

Procurar online ou descarregar pdf Manual de instalação e cuidados para Equipamento de iluminação ClearWater AQUA ELITE 50. ClearWater AQUA ELITE 50 20 páginas.

Imprimir página

J). CHOOSING THE POWER SOURCE

Disconnect the back plate to the motor where the electrical connections are. You

will notice two connections where the power source comes in and is connected.

Connect the Aqua Elite 50's power cable (black, white and green) to the same as

the motor's connections. If connected properly, the unit should come on and off

with the motor.

K). CONNECTING THE ELECTRODE CABLE

Using the Electrode Wire Assembly, connect the two terminal ends to the connectors on each side of the

electrode's connectors by first unscrewing the nuts and then tightening them back on. IT DOES NOT MATTER

WHICH END GETS CONNECTED. Then connect the bare ends to the terminal posts coming out of the power

box. IT DOES NOT MATTER IF YOU ARE CONNECTING TO THE RED OR BLACK POST.

Connecting the control box to the pump motor

(continued)

Terminal

ends