ClearWater Lights Krista Manual de instalação - Página 6
Procurar online ou descarregar pdf Manual de instalação para Acessórios para motociclos ClearWater Lights Krista. ClearWater Lights Krista 12 páginas. Kawasaki concours 1400 led light kit dimmable patent pending
Também para ClearWater Lights Krista: Manual de instalação (16 páginas), Manual de instalação (8 páginas)
Imprimir página
Step 4: Wiring
Wire Routing:
• Be sure to route wires so that they cannot become tangled or caught
in either a suspension part or steering part. Check movement of both
steering and suspension before riding.
• It is sometimes helpful to follow existing wire routing.
Electrical:
• (1) Mount the power relay box in a safe location. Secure with a zip tie. (It
is a good idea to face the relay box with the wires coming out the bottom.)
• (2) Route all wiring so that there is no interference with moving parts.
• (3) Install the switch and dimmer in a convenient location as shown.
• (4) Switch - Crimp spade lugs to red, yellow and black wires from relay
box. Attach to corresponding tabs on switch. (See wiring diagram on Pg. 6)
• (5) Using Posi-tap, attach red (turn on wire) to a switched 12v wire.
• (6) Install connectors as shown in the wiring diagram on page 6.
• (7) Run the Red and Black power wires directly to the battery. The fuse
will protect the system in the event of a short.
High Beam/Horn Feature:
Locate your bike's High Beam headlight hot (+) and Horn's hot (+)
lead. This will make your lights go to full power when you turn on your
high beam or horn. Use a Posi-tap to connect one of the white wires
from the relay box to each of these wires. It does not matter which white
wire you use; both trigger the same way. If you do not want to use these
features, simply tuck the white wires away in a neat fashion. Reference
the photo below for the location of the headlight and horn wires.
Page 6
(Please consult owners manual for wiring diagram and color codes)
Page 5
Tap Reference (photo below):
Grey + Pink Stripe = Turn On Wire
Solid Grey = High Beam