ClearWater Lights Sevina Manual de instalação - Página 14
Procurar online ou descarregar pdf Manual de instalação para Acessórios para motociclos ClearWater Lights Sevina. ClearWater Lights Sevina 16 páginas. Kawasaki concours 1400 led light kit dimmable patent pending
Também para ClearWater Lights Sevina: Manual de instalação (12 páginas), Manual de instalação (8 páginas)
Imprimir página
Step 4: Wiring
Electrical:
• Run the Red and Black power wires directly to the battery. The fuse will
protect the system in the event of a short.
• Mount the power relay box in a safe location (see photo below for one
recommended location). Secure with a zip tie. It is a good idea to face
the relay box with the wires coming out of the bottom. This helps keep
everything dry.
Under beak relay box location.
• Route the two Black connectors for the lights to a convenient location
where they will not interfere with steering or any other moving parts.
• Install the switch in a convenient location. Refer to the sticker on the
switch for proper placement.
• Switch - Crimp spade lugs to red, yellow, and black wires from relay box.
Attach to corresponding tabs on switch. (See wiring diagram)
• Using Posi-tap, attach red (turn on wire) to a switched 12v wire. Be sure
not to use a Low beam headlight wire on H4 headlight bikes or else the
lights will shut off when the high beam is activated.
• Install connectors as shown in the wiring diagram on page 7.
High Beam Feature:
Locate your bike's High Beam headlight hot (+) lead. This will
make your lights go to full power when you turn on your high beam. Use
a Posi-tap to connect one of the white wires from the relay box to this
wire. It does not matter which white wire you use; both trigger the same
way. If you do not want to use this feature, simply tuck the white wire
away in a neat fashion.
Horn Feature:
Locate the Horn's hot (+) lead. This will make your lights flash
to full when you sound your horn. Use a Posi-tap to connect one of the
white wires from the relay box to this wire. It does not matter which white
wire you use; both trigger the same way. If you do not want to use this
feature, simply tuck the white wire away in a neat fashion.
Page 14
Page 13