ArtFox Pixel Blinder Bar Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de DJ ArtFox Pixel Blinder Bar. ArtFox Pixel Blinder Bar 14 páginas.

6. How to Control the Unit

You can operate the unit in three ways:

1. By master/slave built-in preprogram function

2. By DMX controller

3. By ARTNET

6.1 Master/Slave Built In Preprogrammed Function

By linking the units in master/slave connection, the first unit will control the other units to

give an automatic, sound activated, synchronized light show.

Using universal DMX controller to control the units, you have to set DMX address from 1

to 512 channel so that the units can receive DMX signal.

Using universal DMX controller to control the units, you have to set DMX address from 1

to 512 channel so that the units can receive DMX signal.

Press the MENU button up to when the DMX Address is showing on the display. Pressing

ENTER button and the display will blink. Use DOWN and UP button to change the

DMX512 address. Once the address has been selected, press and keep ENTER button

pressed up to when the display stops blinking or storing automatically 8 seconds later. To

go back to the functions without any change press the MENU button again. If you use

please refer to the following diagram to address your DMX512 channel for the first 4 /2

units.

Channel Mode

7 CH

28 CH

32 CH

384 CH

Unit 1

Unit 2

Addr

385

Unit 3

Unit 4

Addr