AIMS Power PRM1000W24120S Manual de operação - Página 4
Procurar online ou descarregar pdf Manual de operação para Inversor AIMS Power PRM1000W24120S. AIMS Power PRM1000W24120S 16 páginas. 1u rack
RS232 communication port and communication program operation method
● RS232 communication port controls with non-synchronous serial transmission (ASCII cord) method.
● RS232 communication program is real time operation, and status can be monitored through serial function of PC screen by program
connected with and provided by computer (PC) application port.
AIMS Power RS232 program execution
①
RS232
Sereal
PORT
COM3 ▼
Data Bits
8
04
Run program execution file in figure AIMS_Power 232.exe
Baudrate
2400
▼
Connect
▼
Stop bits
0
▼
Parity
DC input
00
v
AC output
00
v
Frequency
00
Hz
Amp
00
v
② When you start the program, it will run as shown in the figure.
Check once more if inverter cable is well connected before running
program.
Once connection is made, user's PC port connected with inverter
Once connection is made, user's PC port connected with inverter
Exit
should be set. When clicking on
NONE ▼
screen, it will show choices of 1 to 10. Find and select inverter and PC
port from the choices.
③ When port selection is made, click on
between inverter and PC.
If port is not properly selected or cable connection is made incorrectly,
or inverter power is off, message
comfirmation window. In this case, press OK to close window, select a
correct port or double check the cable connection status.
④ If connection is established normally,
button indicates connection between inverter and PC is
Disconnect
established normally.
If connection is made completely, inverter DC input voltage, AC
output voltage, frequency, and output current can be verified using
buttons at the lower part of the program screen.
port in program
PORT
COM3 ▼
to start communication
Connect
will appear along with
fail Port open
button turns into
Connect