ARTFOX Lighting LED Spot 150W RGBW Quad Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Luz de inundação ARTFOX Lighting LED Spot 150W RGBW Quad. ARTFOX Lighting LED Spot 150W RGBW Quad 8 páginas. Led moving head

Imprimir página
Rotation Gobo
10
12
18
Wheel
Gobo
11
13
19
Rotation
20
12
14
Prism Insertion
13
15
21
Prism Rotation
14
16
22
Focus
15
17
23
Call Program
Function
16
18
24
"Stay in a certain
value for more
than 5 seconds"
Gobo 7 Shak From Slow To Fast
140~149
150~202
Forward Rotation Effect From Fast To Slow
Forward Rotation Effect From Slow To Fast
203~255
0~127
Gobo Index
128~190
Gobo Forward Rotation From Fast To Slow
Stop Rotation
191~192
193~255
Gobo Reverse
Rotation From Slow To Fast
Prism Excluded
0~127
128~255
Prism Inserted
0~127
0 - 540 Angle Degree Indel
128~190
Forward Rotation from Fast to Slow
191~192
Stop
193~255
Reverse Rotation from Slow to Fast
0~255
Line Focus
No Function
0~50
Preset Program 1
51~100
101~150
Preset Program 2
151~200
Preset Program 3
201~255
Preset Program 4
Unused
0~24
Reset: Effects
25~49
Unused
50~74
Reset: Pan Tilt
75~99
Unused
100~124
Reset: Complete
125~149
Unused
150~174
Unused
175~199
Unused
200~224
Unused
225~255
12

DMX TERMINATOR

In the Controller mode, at the last xture in the chain, the DMX output has to be connected with a
DMX terminator. This preventselectrical noise from disturbing and corrupting the DMX control
signals.
The DMX terminator is simply an XLR connector with a 120Ω(ohm) resistor connected across pins 2
and 3, which is then plugged into the output socket on the last projector in the chain. The
connections are illustrated below.
2
1
DMX TERMINATOR CONNECTION
Connect a 120Ω (OHM) resistor
across pins 2 and 3 in an XLR plug
3
and insert into the DMX out socket on
120Ω

SETUP OPTIONS-PROJECTOR CONFIGURATION

Projector conguration can be set conveniently via press button switch and LCD display.
To browse or change its setup options, Press button ENTER to unlock panel. Menu will be displayed
on the screen, each menu has it own sub-menu. Each menu has specic function, Please refer to
"Operation Menu" for details.
Press button UP or DOWN if you want to browse or change through the various Setup Options.
Press button ENTER to save your settings or enter the next menu.
Press button UP or DOWN to change values.(Add or subtract)
Press button FUNC , it will return to the upper menu one by one.

TO SET THE DMX START ADDRESS

Each projector must be given a DMX start address so that the correct projector responds to the
correct control signals. This DMX start address is the channel number from which the projector
starts to "listen" to the digital control information being sent out from the controller. The xture
have 3 DMX modes. There are simple mode, standard mode and extended mode. For example
standard mode has 18 channels, so set the No. 1 projector's address 001, No. 2 projector's address
019, No. 3 projector's address 037, No. 4 projector's address 055 and so on.
Launch the projector. Press button ENTER more than 5 seconds to unlock panel.
Press button ENTER to display DMX address.
Press button UP or DOWN , you can set the address.
Press button ENTER to conrm, which means the projector has saved the Start Address
automatically, when powered on next time, it will display the value saved last time.
Press button UP or DOWN to change values.(Add or subtract)
Press button FUNC , it will return to the upper menu one by one.
the last unit in the chain.
PIN2
5
PIN3