Clearwell Mobility 1A3900 Instruções para o utilizador - Página 2

Procurar online ou descarregar pdf Instruções para o utilizador para Ajuda à mobilidade Clearwell Mobility 1A3900. Clearwell Mobility 1A3900 4 páginas.

Imprimir página

4. ASSEMBLY

Insert the front wheel assembley into the the

front frame tubes and secure with the c-clips.

Insert the rear wheels into the rear frame tubes

until the button clip clicks into place.

Note: Make sure all wheels are all set to the

same height before use.

Insert the handlebars and secure with the

handwheel bolts on both sides.

Fit the back rest into the frame and secure

with 2x snap clips on both sides.

4.1 Handle Height Adjustment

Adjust the Rollator handle height so that

when the user's arm is down to their side,

the hand-grip is at wrist height. This will

ensure the arms are at an approximate 20°-

30° bend when using the Rollator.

Undo and remove the hand-wheel by

turning anticlockwise. Adjust the handle

height to the required position, then

secure using the hand-wheel. Repeat for

the opposite handle.

Note: Make sure both handles have been

set to the same height before use.