FiTech 50019 Manual de instruções
Procurar online ou descarregar pdf Manual de instruções para Bomba de água FiTech 50019. FiTech 50019 6 páginas. Go fuel in-tank retrofit kit
Imprimir páginaNOTE: This In-Tank Fuel Pump Kit can be used with any EFI or carbureted
application when the proper bypass regulator is used.
Warning: Caution must be observed when
installing any product involving fuel system parts
or gas tank modifications. Work in a well-
ventilated area with an approved fire extinguisher
readily available. Eye protection and other safety
apparel should be worn to protect against debris
and sprayed gasoline. We recommend having
this installation performed by an experienced,
qualified, and FiTech approved automotive
technician. The finished installation must be
thoroughly checked for any fuel system leaks.
The fuel system is under pressure, so be sure to
relieve the pressure before opening the fuel
system. All safety precautions must be observed
when working with fuel.
This instruction manual is designed to get you up and running with your FiTech Go Fuel In-Tank Fuel
Pump Kit. Please read the full instruction manual before beginning your installation. For technical
assistance with your FiTech Go Fuel In-Tank Kit, call 951-340-2624 or email
Kit Contents
1. Pump Main Assembly
2. Thin Foam Gasket
3. Thick Foam Gasket
4. C-Ring
5. High Flow Fuel Pump (qty
2 in 50020 Kit)
6. (12) #14 Sealing washer
7. (12) 1/4-20 x 1.5" allen bolt
8. (2) 1/4-20 x 3" threaded
stud
9. (2) 1/4-20 nut
10.
Fuel Hose Clamp (qty 2
in 50020 Kit)
11.
(2) Electrical connectors
(qty 4 in 50020 Kit)
12.
(2) Rubber Boots (qty 4
in 50020 Kit)
13.
Filter Sock V1 (qty 2 in
50020 Kit)
14.
Pump mounting clamp
(qty 2 in 50020 Kit)
15.
Filter Sock V2 (qty 2 in
50020 Kit)
Instructions # 50019/50020
Go Fuel In-Tank Retrofit Kit
Unpack the kit
Carefully unpack the components of your # 50019/50020 kit. Lay parts
out on table and compare with Kit contents above to confirm all parts are
in kit.
1
Caution: Before starting this installation be sure
the negative terminal is disconnected from the
battery, you have proper eye protection, a fire
extinguisher handy, and that you are working with
a clean and free of combustible fumes fuel tank.
The installation of fuel related components should
be done in a well-ventilated area free of any
possible fire hazards. Gasoline fumes are toxic
and highly flammable. Drilling and grinding can
be a potential ignition source. Smoking is
prohibited and extinguish any open flames. Start
with a new fuel tank or have the fuel tank
professionally cleaned for the safest install.
Failure to comply with these warnings could result
in injury or death.