dji AGRAS MG-1S Manual de Instruções - Página 2

Procurar online ou descarregar pdf Manual de Instruções para Drones dji AGRAS MG-1S. dji AGRAS MG-1S 17 páginas. Spreading systems
Também para dji AGRAS MG-1S: Manual de início rápido (20 páginas)

Imprimir página

Disclaimer

Carefully read this entire document and all safe and lawful practices provided by DJI

product for the first time. Failure to read and follow instructions and warnings may result in serious injury

to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using

this product, you hereby signify that you have read this disclaimer carefully and that you understand

and agree to abide by all terms and conditions of this document and all relevant documents of this

product. You agree to use this product only for purposes that are proper. You agree that you are solely

responsible for your own conduct while using this product, and for any consequences thereof. DJI

accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the

use of this product.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. and its affiliated companies. Names of products,

brands, etc., appearing in this document are trademarks or registered trademarks of their respective

of this product or document shall be reproduced in any form without the prior written consent of or

authorization from DJI.

This disclaimer is available in various languages. In the event of divergence among different versions, the

English version shall prevail. The final interpretation of this document and all related documents of this

product belongs to DJI. This content is subject to change without prior notice. For up to date product

information, visit http://www.dji.com and click on the product page for this product.

Warnings

1. The MG Series Spreading System (abbreviated as Spreading System) is only compatible with the

DJI AGRAS

MG series aircraft, and the firmware of the aircraft must be the correct version for

supporting the Spreading System. Refer to the Specifications section for more information about

compatible aircraft. DO NOT use it with other products or for purposes other than agriculture.

2. The Spreading System is compatible with dry materials of a diameter between 0.5 - 5 mm. DO

NOT use with other materials. Use with other materials will adversely affect operating results and

may damage the Spreading System. All materials must be used in strict accordance with the

instructions for those materials.

3. Internal spread tank load must not exceed 10 kg.

4. Use of a threadlocker is required during the installation process. Make sure that the threadlocker

is totally dry and solid before flight.

5. Make sure that the hopper gate and spinner disk function normally before each use.

6. Operate with caution to avoid injury caused by mechanical parts.

7. When spreading is in progress, maintain a safe distance from the Spreading System to avoid injury.

8. If spreading while a radar module is mounted, the minimum detection range of the radar module

will be increased from 1.5 m to 5 m due to obstruction from the materials being spread and the

radar module may incorrectly detect obstacles. Note that the aircraft cannot sense obstacles

that are not within the detection range. The detection performance of the radar module will also

decrease. Fly with caution. Refer to the disclaimer and safety guidelines of the corresponding

aircraft you are operating or the user guide of the radar module for more information on the radar

module.

9. DO NOT use liquids to rinse the Spreading System. It is recommended to use dry compressed

air as a cleaning agent.

before using this