Akku Power 7S2P Manual - Página 6

Procurar online ou descarregar pdf Manual para Acessórios para câmaras Akku Power 7S2P. Akku Power 7S2P 14 páginas. Li-ion dt2 battery, 25.2v / 9.0/5.0ah / 226.8/126wh, idex fire & safety
Também para Akku Power 7S2P: Instruções de segurança (12 páginas)

Imprimir página

All possible LED combinations are listed in table 2 to table 7

LED

combination

number

Table 2: State of charge (SOC) indicator during charging

When the battery is placed on the tool the SOC will be displayed once,

for approx. 60 sec.

During charging and discharging on the tool the SOC is permanently

displayed. Disconnected from the tool and charger the state of charge

(SOC) is displayed for 25 seconds after pushing the query button. The

SOC lights turn automatically off after the indicated time or by pushing

the query button again.

LED

combination

number

Table 3: State of charge (SOC) indicator on tool or stand alone

Description

Capacity = 100%

Capacity >=75%

Capacity >=50%

Capacity >=25%

Capacity < 25%

Description

Capacity >=75%

Capacity >=50%

Capacity >=25%

Capacity < 25%

Undervoltage

(fast blinking)

Charge Cycles

The number of charging cycles is shown when the button is pressed for at least 5s.

If you have activated the white LED already the cycles counts are not displayed. You

need to turn off the white LED before.

Cycle counts

LED

combination

combin-

ation number

Table 4: Cycle counter indication

Separator code

LED

combination

combin-

ation number

Table 5: Error indicator

The separator codes light up once after the cycle counts.

Error codes

The error codes are displayed after the error occurrence and will be

displayed until the query button is pressed again. The BMS will store

the last 3 error codes.

Description

Cycles = Cycles + number of blinks

x 10

Cycles = Cycles + number of blinks

x 100

Cycles = Cycles + number of blinks

x 1000

Description

Separator between cycle count and

fault memory indicator