dji Matrice 600 Pro Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Drones dji Matrice 600 Pro. dji Matrice 600 Pro 16 páginas.
Também para dji Matrice 600 Pro: Manual de início rápido (8 páginas), Manual de referência rápida (9 páginas)
Imprimir página
Installation
Mounting the Landing Gear
1. Ensure the screw on the landing gear leg is pointing in the same direction as the gap next to the
knob on the landing skid. Insert both landing gear legs into a corresponding landing skid, rotate
the landing gear leg until it is fully seated into the landing skid, and then secure it in place by
tightening the knob.
2. Ensure the hook on the landing gear leg is facing toward the outside of the aircraft, then attach
it to the connector on the aircraft body. Rotate the landing gear leg until it is fully seated into the
connector.
3. Connect both springs to the center frame and the landing gear legs. Mind your fingers when
mounting the springs.
1
Unfolding the Aircraft
1. Gently lift the frame arm. Twist the red knob to lock each arm in place. To store, untwist the knob
and lower the frame arm.
2. Unfold the propellers.
3. Unfold the GPS-Compass Pro and ensure that all the arrows on the GPS-Compass Pro point
toward the front of the aircraft.
6
©
2016 DJI All Rights Reserved.
Note the
orientation
Note the
Orientation
2
Attach