Arthur Grillo DPC200-MOD Manual de instalação e operação - Página 10
Procurar online ou descarregar pdf Manual de instalação e operação para Controlador Arthur Grillo DPC200-MOD. Arthur Grillo DPC200-MOD 18 páginas. Differential pressure / volume flow controller
Imprimir página
OPERATION
5.3 Start up & modbus control
Display
controlling mode
ΔP = 150 Pa
menu
modbus
modbus address
1
modbus baud rate
9600
modbus parity
none
unit metric
operating mode
control mode
parameter
diff. pressure
5.4 Measuring mode
fan k-factor
k = 70
characteristic
linear
back and confirm
characteristic
linear
back and confirm
10
Doc.-no.: DPC200-MOD_02_EN
Start menu: Press button B1 approx. two seconds
Press button B2 to get to the next menu item
Press button B1 to switch between: on <=> off Press button B2 to
get to the next menu item
If selected parameter = ON
Button B1: reset value
Button B2: set value
Button B1: confirm value, display flashes once
Press button B2 to get to the next menu item
Button B1: choose among 7200, 9600, 14400, 19200, 38400, 57600
Press button B2 to get to the next menu item
Button B1: choose among none, even, odd, none_2_stop_bits
Press button B2 to get to the next menu item
Press button B1 to switch between:
metric <=> imperial
Press button B2 to get to the next menu item
Press button B1 to switch between:
measuring mode <=> control mode
Press button B2 to get to the next menu item
Press button B1 to switch between:
diff. pressure <=> volume flow
Press button B2 to get to the next menu item
If selected parameter = volume flow
Button B1: reset value
Button B2: set value
Button B1: confirm value, display flashes once
Press button B2 to get to the next menu item
Press button B1 to switch between:
linear <=> square root
Press button B2 to get to the next menu item
Press button B1 to leave the menu
Press button B2 to stay in the menu
If selected parameter = diff. pressure
Press button B1 to switch between:
linear <=> square root
Press button B2 to get to the next menu item
Press button B1 to leave the menu
Press button B2 to stay in the menu
Action
Issue: 08/2019