dji MAVIC 3 PRO Manual do utilizador - Página 17

Procurar online ou descarregar pdf Manual do utilizador para Drones dji MAVIC 3 PRO. dji MAVIC 3 PRO 20 páginas.
Também para dji MAVIC 3 PRO: Manual de início rápido (8 páginas), Manual de início rápido (10 páginas)

Imprimir página

Calibrating the Compass

The compass may need to be calibrated after the remote controller is used in areas with electromagnetic

interference. Follow the steps below to calibrate your remote controller.

1. Power on the remote controller, and enter Quick Settings.

2. Tap

enter system settings, scroll down and tap Compass.

3. Follow the on-screen instructions to calibrate the compass.

4. A prompt will be displayed when the calibration is successful.

Firmware Update

When the remote controller is linked with the aircraft, a prompt will appear if new firmware is available.

Tap the prompt and follow the intructions to update the remote controller. The remote controller

automatically restarts when the update is complete. Make sure the remote controller is connected to the

internet during the update.

The remote controller is pre-installed with the DJI Fly app. You can update the remote controller

without the aircraft being linked. Power on the remote controller and enter the home screen of DJI

Fly. Tap Profile > Settings > Firmware Update > Check for Firmware Update, and then follow the

instructions to update the remote controller.

Make sure the remote controller has a battery level of more than 20% before updating.

The update takes approximately 15 minutes. The time it takes to download the update varies

depending on the internet speed. Make sure the remote controller has access to the internet during

the update.