ARTHUR HOLM AH22TX16GA Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Monitor ARTHUR HOLM AH22TX16GA. ARTHUR HOLM AH22TX16GA 20 páginas. Manually foldable professional monitors
Também para ARTHUR HOLM AH22TX16GA: Manual do utilizador (20 páginas)
Imprimir página
SYSTEM DESCRIPTION
Box Contents
Important Note: This device can only work with the power supply
included in the shipping box. This power supply can not be replaced by
any other rather than the original one
Connections
Power connection
1. Plug the power cable from the power supply into an AC
socket of 100-240 Vac, 50-60Hz.
2. Plug the 12Vdc cable into the socket on the unit
Signal connection
1. Use the DVI-I input to connect a DVI-D signal or an analog RGB
signal (VGA).
2. Plug the DVI-D connector to a DVI-D signal.
Use high quality DVI cables with 2m maximum length.
Trouble shooting
The monitor doesn't turn on:
Check the power connections at the AC plug to the DC plug on the unit
No input signal:
Check the input signal cables
No image is displayed:
Check the status of the brightness, contrast and colour controls
Bad quality image:
Check the input signal cable
Try to auto adjust the image or reset the controller
Other problems:
Please, contact your distributor
9