EDIFIER CC200 Manual de início rápido - Página 3
Procurar online ou descarregar pdf Manual de início rápido para Auscultadores EDIFIER CC200. EDIFIER CC200 6 páginas. Wireless mono headset
Imprimir página
◼ Operating instructions
⚫ Power on/off
•
Power on: When the headset is off, press and hold the power button for 3s (green light lit for 1s);
•
Power off: When the headset is on, press and hold the power button for 3s (red light lit for 1s).
⚫ Charge
•
Connect the headset to power source with the included charging cable for charging.
•
Red light steady lit = charging
•
Input: 5V
500mA
Warning: The rechargeable batteries that provide power for this product must be disposed properly for
recycling. Do not dispose of batteries in fire to prevent an explosion.
⚫ Bluetooth connection
•
For initial use, press and hold the power button for 3s to power on until the red and green lights flash
rapidly and alternately, then you can directly set mobile phone to search for and connect to "EDIFIER
CC200". For subsequent use, the headset will directly connect to the device connected last time.
Connect to new devices:
•
When the headset is off, press and hold the power button for 5s to enter Bluetooth pairing (red and green
lights flashing rapidly and alternately).
•
Set mobile phone to search for and connect to "EDIFIER CC200", after pairing is successful, the green
light will flash twice rapidly and then turn off.
red light off = fully charged