dji Zenmuse H3-3D Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Drones dji Zenmuse H3-3D. dji Zenmuse H3-3D 18 páginas.

2. Attach the bottom plate of the damping unit to the upper plate. To do this, insert the securing

pins on the tip of the vibration absorbers into the mounting holes on the bottom plate.

3. Cover the securing pins with washers to lock the damping unit in place. Only push the

washers past the first nut.

4. Plug the 8-pin cable from the Phantom 2 into the Phantom 2 port on the anti-interference

enhancement board. Then use the supplied 8-pin cable to connect the H3-3D port on the anti-

interference enhancement board to the 8-pin port on the gimbal.

Aircraft, camera, and accessories are not included with the gimbal.

Camera must be aligned to face the nose of the aircraft, and the gimbal should be parallel

with the aircraft itself.

The gimbal is calibrated before delivery. Do not attempt to adjust or calibrate it yourself.

Do not remove any screws in the gimbal, which may result in reduced performance or failure.

Do not unplug any cable attached to the gimbal ports or change the mechanical structure of

the gimbal.

The 8-pin port on the H3-3D should only to be used to connect the gimbal to your aircraft.

Do not connect other devices (such as a 5.8G video downlink transmitter) to this port,

otherwise the gimbal may be damaged.

ZENMUSE H3-3D User Manual