EDIFIER E25HD Manual

Procurar online ou descarregar pdf Manual para Sistema de altifalantes EDIFIER E25HD. EDIFIER E25HD 7 páginas. Multimedia speaker

Imprimir página

1. What's in the box?

Passive speaker

3.5mm to RCA audio cable

3.5mm to 3.5mm audio cable

Fiber optic audio cable

Speaker connecting cable

Note:

•Images are for illustrative purposes only and may differ from the actual product.

•For the need of technical improvement and system upgrade, information and

specifications contained herein may be slightly different from actual product. If any

difference is found, the actual product prevails.

2. Functional operation

Side view of active speaker

●

Control

Rear view of active speaker

●

Rear view of passive speaker

●

3. Remote control

Previous track (Bluetooth mode)

Play/pause (Bluetooth mode)

Mute/mute off (AUX/OPT mode)

Press: Bluetooth mode

disconnect Bluetooth

Battery replacement

1. Slide the switch along the slot to the end and simultaneously rotate the battery

compartment lid counterclockwise until the point indicator aligns with the "

2. Remove the battery compartment and insert a new battery into the battery

compartment with its positive electrode outwards.

3. Put back the battery compartment lid and rotate it clockwise until the point

indicator aligns with the "

4. Connection

Power input: 100-240V~ 50/60Hz

* This plug type is meant for illustration purpose only.

5. Operating instructions

● Bluetooth input

Press the "

Select "EDIFIER e25HD" in your device setting to connect.

The indicator light will blink blue rapidly and then remain solid blue if successful.

Note:

•Pin code for connection is "0000" if needed.

•To enjoy all Bluetooth functions of this product, make sure that your audio source

device supports A2DP and AVRCP profiles.

•If no device is connected in 30 minutes, the speaker will switch to Bluetooth hidden

mode. In this mode, (1) new devices cannot find the speaker, but (2) for a device

that exists in the pairing record of this speaker, you can select "EDIFIER e25HD"

from its Bluetooth device list to reconnect. To exit from Bluetooth hidden mode,

press the "

•To disconnect from the current Bluetooth device, press and hold the "

on the remote control for 1.5 seconds, or simultaneously tap and hold the buttons

of "

", "

", and "

● AUX input

Connect the speakers to your audio device using the audio cable.

Press the "

Note:

The speaker detects the plug-in or plug-out of an AUX audio cable.

•If an AUX audio cable is connected, the speaker will switch to AUX mode

automatically.

•If the AUX audio cable is plugged out, the speaker will switch to Bluetooth mode

automatically.

● OPT input

Connect the speakers to your audio device using the fiber optic audio cable.

Press the "

Note:

The speaker detects the plug-in or plug-out of a fiber optic audio cable.

•If a fiber optic audio cable is connected, the speaker will switch to OPT mode

automatically.

•If the fiber optic audio cable is plugged out, the speaker will switch to

Bluetooth mode automatically.

6. Specifications

Total output power: R/L(Treble): 15W+15W, R/L(Mid-Bass): 22W+22W

Frequency response: 50Hz-40kHz

Input: 20V

2.75A

Declaration for EU

Frequency Band: 2.402GHz ~ 2.480GHz

RF Power output: ≤13 dBm (EIRP)

There is no restriction of use.

7. Troubleshooting

Cannot connect to your Bluetooth device

• Make sure that the distance between this product and your Bluetooth device

is less than 10 meters and there are no obstacles between them.

• Make sure that no device is connected to this product via Bluetooth.

• Make sure that this product is in Bluetooth pairing mode. If not, manually

switch it to this mode.

• Restart this product, enable Bluetooth function on your Bluetooth device,

and then try again.

• Reset this product to factory settings and try again.

No power

• Make sure that the power cable is properly connected.

• Make sure that the power supply is not disconnected.

No sound

• Make sure that this product and your device is properly connected.

• Make sure that the correct audio input source is selected.

• Make sure that the playback is not paused.

• Make sure that this product and your device are not muted.

• Increase the volume of this product and your device.

Noise coming from speakers

• EDIFIER speakers generate little noise, while the background noise of some

audio devices are too high. Please unplug audio cables and turn the volume

up. If no sound can be heard at 1 meter away from the speaker, there is no

problem with this product.

To learn more about EDIFIER, please visit www.edifier.com

For EDIFIER warranty queries, please visit the relevant country page on

www.edifier.com and review the section titled Warranty Terms.

USA and Canada: [email protected]

South America: Please visit www.edifier.com (English) or

www.edifierla.com (Spanish/Portuguese) for local contact information.

Multimedia Speaker

Power on/off

Bluetooth mode

Press and hold:

CR2025

" icon.

" button on the active speaker or the "

on the remote control.

Switch to Bluetooth mode.

" button on the speaker or the "

" on the active speaker for 3 seconds.

" button on the active speaker or the "AUX" button

on the remote control.

Switch to AUX mode.

Play audio on the connected device.

" button on the active speaker or the "OPT" button

on the remote control.

Switch to OPT mode

Play audio on the connected device

e25HD

Manual

Active speaker

Play/pause (Bluetooth mode)

Mute/mute off (AUX/OPT mode)

Disconnect Bluetooth

Next track (Bluetooth mode)

Previous track (Bluetooth mode)

Connect to active speaker

AUX

2:12

Settings

Bluetooth

DEVICES

EDIFIER e25HD

Cleaning cloth

Remote control

Power adapter & power cable

Quick start

guide

Power on/off

Press and hold: power on/off

Press: switch input mode

(Bluetooth/AUX/OPT)

Volume up

Volume down

Mode Indicator

Green: AUX mode

Red: OPT mode

Blue: Bluetooth mode

Audio input port

Power adapter port

Connect to passive speaker

Volume up

Next track

(Bluetooth mode)

Volume down

OPT mode

OPT

AUX mode

" button

AUX

OPT

Solid blue

" button on the remote control.

AUX

OPT

Solid green

OPT

AUX

OPT

Solid red

AUX

OPT

Important safety

instructions

" icon.

" button