dji CP.PT.00000130.02 Perguntas frequentes - Página 3

Procurar online ou descarregar pdf Perguntas frequentes para Quadricópteros dji CP.PT.00000130.02. dji CP.PT.00000130.02 4 páginas.

Yes.

What is the Battery to Power Bank Adaptor used for?

Users can insert the adaptor into a battery and turn it into a mobile power bank.

What functions does the power button perform?

The power button powers on and off the battery. To do this, press it once, and then press again,

holding it for at least two seconds to power on or off the battery.

The power button also allows you to check the battery level. To do this, press the power button once

and observe how many LEDs light up for the power level.

How long does it take to charge a battery fully?

It takes 55 minutes to charge a battery fully when using a standard USB charger or a Charging Hub.

How often should I charge my batteries?

It is recommended to charge batteries at least once every three months fully.

Updating Firmware

Can I use other apps while updating DJI GO 4?

No. If you do, the update will fail. You will then need to download the firmware and update again.

Why does DJI GO 4 remind me to reconnect to the Mavic Air's Wi-Fi right

before it restarts to complete the update?

Before the update is complete, the aircraft will need to restart. Once it does, reconnect your mobile

device to the Mavic Air's Wi-Fi. DJI GO 4 is just reminding you that you will need to do this for a

successful update.

Can I disconnect from the internet once the firmware is downloaded

successfully?

Yes.

What should I do if the aircraft and battery firmware versions are inconsistent?

Connect the Mavic Air to DJI GO 4, and the app will inform you of appropriate updates to ensure

consistency.

What factors could lead to an update failure?

a. Low-battery level. Make sure the battery level is higher than 50%.

b. Powering off the Mavic Air or the remote controller during the update. If this happens, please

restart the Mavic Air and the remote controller and begin the update again.

c. Internet disconnection when downloading firmware.

d. If update failure persists, or the remote controller does not link with the aircraft, there may be

firmware inconsistencies between devices. In this case, use DJI Assistant 2 on your computer to

update your aircraft and the remote controller to the latest versions separately.

Video Transmission

What is the Mavic Air's video transmission range?

When connected to the remote controller:

2.4GHz